Burner Parts

This Hollow Cone Type A, 60 degree, Atomizing Fuel Nozzle mixes fuel and air to turn the fuel into a combustible mist.

The PS2 Hot Water Pressure Switch activates at 217.5 PSI, balancing your pressure washer's hot water system for efficient operation.

12 Volt Solenoid Coil for Sunstrand Fuel Pump.

The Suntec (Sundstrand) fuel pump with an integrated 240 Volt Solenoid moves the fuel oil from the fuel tank to the fuel nozzle. It is driven by the burner motor.

Beckett's new PowerLight ignitor offers improved performance and a longer life. It boasts simplified wiring requirements and few wires for easier installation.

Easily and accurately turn your burner on and off when it reaches a pre-set temperature by plumbing this Probe-Style Thermostat into your burner. It allows a preset up to 190 Degrees F.

This 230 Degree High Limit Switch is a protective part of a burner designed to keep the mechanism from overheating itself. It operates as a Safety Device to shut off the burner. Rests Normally Closed

The Suntec (Sundstrand) fuel pump with an integrated 120 Volt Solenoid moves the fuel oil from the fuel tank to the fuel nozzle. It is driven by the burner motor.

Boasting a spring return float that allows for full mounting versatility, this forged brass body Flow Switch performs at up to 8 GPM and 4050 PSI.

Upgrade your Beckett burner with the Beckett 5218303U PowerLight 12VDC S Ignitor. Featuring a longer life and simplified wiring, it's a universal replacement compatible with various burners.

The Pressure Switch sends a signal to the Fuel Solenoid to turn on or off fuel.

For solenoid control only, this tough, impact resistant Flow Switch with Viton Seals and a Tungsten contact reed switch performs at up to 8 GPM and 4350 PSI.

This 115V EHASR Series of Burner Assemblies features Flamelock which assures a positive flame stability, resulting in a clean, uniform high temperature flame.

Stop "smokey" burners at start-up and eliminate "shut down" after burn with this 130 PSI spring-loaded Snap Check Valve that replaces the filter element on your fuel nozzle.

Connects to a RK-40 Series Water Heater Exhaust for the attachment of the RKSA-41T Top Stack Adapter which connects to a 12” Double Wall Insulated stack.

Burner Coupling, Fuel Type Oil.

Upgrade your Wayne MSRDC burner with the Beckett 5218307U PowerLight 12VDC Ignitor. Improved performance, simplified wiring, and compatibility with various burners make it a versatile choice.

The PS6 Hot Water Pressure Switch activates at 218 PSI, balancing your pressure washer's hot water system for efficient operation.

Easily and accurately turn your burner on and off when it reaches a pre-set temperature by plumbing this Probe-Style Thermostat into your burner. It allows a preset up to 194 Degrees F.

Designed to balance your Pressure Washer's hot water system, it activates at 363 PSI to allow water to flow through the heating coil as hot water is demanded.