The #1 Source for Commercial Pressure Washing Equipment, Supplies & Training
0 $0.00

Electric Hydrotek Portable Recycle/Reclaim System

In Stock
Leave a review
Finance Now!
As Low As

A portable recycle systems powered by Hydro Tek SC Series the AZV55 and AZV88 portable recycle system is protecting the environment from wash water runoff and complying with governmental storm drain regulations is simple, economical and effective with the AZV Series. The AZV vacuum and filtration system provides 6 stages of filtration up to 8gpm continuous five micron processing of wastewater where soaps and other chemicals are not used. Wastewater is recovered through a vacuum scupper, up to 12gpm, to eliminate run-off. Recycled water is pumped back to your bulk water tank for reuse to power wash concrete or other flatwork. You may also choose to divert treated water to landscaping or sewer as permitted. Heavy solids are collected in the V-section of the tank and are easily removed through a quick purge dump valve. When combined with a compatible pressure washer trailer or tank skid, you have a complete self-contained mobile wash, recovery, and recycle unit. The system is the choice of professional cleaners to protect the environment, conserve water, and comply with EPA storm drain requirements. (For use with cold water or hot water up to 200°F)
✓ Continuous pickup, while simultaneously pumping out – no pickup interruption
✓ Simple to run with automatic pump and vacuum controls.
✓ Easy to maintain with replacement filters and new lift-out basket strainer.
✓ Conserve water supply by reusing water to clean concrete and other flatwork.
✓ Pump out bypass allows transfer of water directly to landscaping or sanitary sewer, instead
of to your bulk tank, as permitted.
Vacuum recovery rate of 12gpm, with high level shut-down
Wastewater process rate 8gpm for AZV88
6 stage filtration process, including 3 oil absorption areas – filters to 5 micron purity
Rustproof, all stainless vacuum chamber & housing, with external drain
Automatic pump out, 12v, 15amp, transfers water without interrupting pickup
Complete with a set of filters, oil absorbing sock, containment berms, vacuum scupper, vacuum hose
VACUUM MOTOR 104 CFM, 2 Stage motor, 91” lift, recovers 12 gpm, enclosed in a rustproof stainless housing
VACUUM POWER Powered by SC Series pressure washer Generator (120v / 8.6amp)
BARRIER 1) 6’ Rubber, Sand Filled Berm, 2) 10’ Sand Dam Tubes – sand not included
HOSE 2” x 50’ Spiral Vacuum Hose with scupper attachment
HOPPER Polyethylene Seamless Molded, Slant Cone Bottom, 40 gallon capacity
OIL/SOLIDS SEPARATION Center water column gravity separation with 1½ ” sludge / solids drain – 5 gallon capacity
MOUNTING Factory installed and wired on Hydro Tek trailer (dealer installed on truck or existing trailer)
TRANSFER PUMP 4.9gpm 45psi Triplex Diaphragm with pressure
shutoff and automatic level control, ¾” hose
8gpm 25psi Centrifugal pump and automatic level
control, 1” hose
PUMP POWER Powered by washer battery (12vdc / 13 amp)
Circuit Breaker Protected, Lighted on/off switch
Powered by washer battery (12vdc / 20 amp)
Circuit Breaker Protected, Lighted on/off switch
INLET FILTER * Basket strainer mounted inside separator tank, easy lift-out design
FINAL FILTER * 1) 5 Micron Polyester Felt Bag 7” x 32”, mounted on lid in storage tank
OIL SKIMMER 8” x 24” Absorbent Skimmer included, (use on ground at scupper to collect oil)
FILTER CANISTER 1 50 micron string wound filtering material
FILTER CANISTER 2 20 micron string wound filtering material
WARRANTY One year accessory warranty
DIM / WEIGHT 19.5” x 28” x 42” / 132 # dry weight

Weight 132 lbs
Dimensions 40 × 40 × 54 in




{{ reviewsTotal }}{{ options.labels.singularReviewCountLabel }}
{{ reviewsTotal }}{{ options.labels.pluralReviewCountLabel }}
{{ options.labels.newReviewButton }}
{{ userData.canReview.message }}

Related Products

    Your Cart
    Your cart is emptyReturn to Shop

      Nozzle Size Calculator