Family Owned Since 1970.
PowerWash.com Logo
Login/Register
0

Guns

Find the right trigger gun for your pressure washer without guesswork. Match PSI, GPM, temperature rating, and connections to your machine so you get smooth flow, safe control, and less operator fatigue. This guide explains the key specs, options, and maintenance tips to help you buy with confidence.

Brand

Price

Inlet Size

Max Flow

Max Temperature

Showing 1–20 of 39 resultsSorted by popularity

Pressure Washer Guns: How to Choose the Right Pro Trigger

Start with system specs

PSI and GPM ratings

Choose a gun with ratings that meet or exceed your washer’s pressure (PSI) and flow (GPM). Professional guns commonly cover 4,000–5,000 PSI and 8–12 GPM; high-flow guns serve specialty washdown systems. Never underspec these ratings.

Hot-water capability

If you run hot water, verify the maximum temperature. Many pro guns are rated near 300°F, while others are limited closer to 200–212°F. Pick to match your heater output.

Connections and adapters

Inlet/Outlet threads on pro guns are typically 3/8″ FNPT (inlet) and 1/4″ FNPT (outlet). Consumer setups may use M22. Quick connects are common: 3/8″ at the hose and 1/4″ at the wand/nozzle.

Ergonomics and form factor

Easy-pull triggers reduce hand force. Pick short “stubby” guns for close-up work or tight spaces; choose longer assemblies when you need reach or integrated lances.

Do not exceed the gun’s published PSI, GPM, or temperature. Mismatched components can cause sudden hose movement, leaks, or part failure.

Quick reference: common pro gun specs

Use case Typical ratings Common ports Notes
General professional cleaning 4,000–5,000 PSI, 8–12 GPM 3/8″ FNPT inlet, 1/4″ FNPT outlet Most hot-water capable; pair with 1/4″ QC nozzle side and 3/8″ QC hose side.
High-flow washdown/specialty Lower PSI with very high GPM (20–50+) 1/2″–3/4″ ports (varies by model) Larger ports minimize restriction; check temperature limits and thread type.
Cold-weather weep setups 4,000–5,000 PSI class Typically 3/8″ in, 1/4″ out Weep guns allow a small bypass flow to help reduce freeze risk between trigger pulls.

Upgrading to easy-pull triggers and swivels can noticeably reduce operator fatigue during long shifts—often a small cost for a big comfort gain.

Fitting your hose, wand, and nozzles

  • Confirm the hose end: many pro hoses terminate in 3/8″ quick connect or 3/8″ NPT.
  • Confirm the wand/nozzle end: most wands and colored tips use 1/4″ quick connect.
  • Bridging M22 to NPT/QC is easy with the right adapters—verify size and thread standard.
  • Use sealant rated for high pressure; replace O-rings at the first sign of drips.

Maintenance and troubleshooting

  • Rinse the gun with clean water after using detergents or salt to protect seals and springs.
  • Inspect the trigger pin, safety lock, and quick connects for wear each week of heavy use.
  • If pressure drops or pulses after a nozzle change, verify tip size and check your unloader setting.
  • Leak from the front of the gun usually indicates a worn seat/seal—rebuild kits are inexpensive.

Learn more

Need help choosing a gun for your setup?

Tell us your machine’s PSI, GPM, temperature, and connection types. Our team will match a trigger gun that feels great in hand and delivers the flow you expect.

Talk to an Equipment Specialist

Guns FAQ's

Seats, seals, and O‑rings wear over time—especially with abrasive water or heat. Replace the repair kit and verify your nozzle size and unloader setting afterward.
A weep gun allows a small flow to pass when the trigger is released. This can help reduce freeze risk and pressure spikes in cold climates or stop‑and‑go work.
Pick a short gun for close-up control around vehicles, tight spaces, or when using foam cannons and short lances. Use longer assemblies when you need more reach.
It reduces the hand force required to keep the trigger open, which lowers operator fatigue during long jobs without changing the machine’s output.
No. Check the gun’s temperature rating and match it to your heater output. Many pro guns are rated near 300°F, while others are limited to about 200–212°F.
Most pro guns use a 3/8″ FNPT inlet for the hose and a 1/4″ FNPT outlet to the wand/nozzle. Many setups then step to 3/8″ quick connect on the hose side and 1/4″ quick connect on the nozzle side.
Home Backup - 2-2-24
Special Offer
PowerWash Prime Membership
  • FREE Shipping
  • 5% Off Delux Products
  • Free Tech Support
  • 40% Off Online Training
  • 25% Off In-Person Training
  • One Simple Subscription
Click to Join