Accessories
Outfit your pressure washer with the right accessories for better results, longer equipment life and safer operation. This parent category gathers the most-used add‑ons in one place so you can quickly route to the part or attachment you need.
Browse popular subcategories below or use the selection notes to confirm compatibility with your machine’s PSI, GPM, temperature, and thread standards.
Featured Categories
-
-
-
-
Mosmatic TUW-750 30″ Stainless Steel Undercarriage Cleaner with 3x 1/8″ Rotor Arms
$1,882.97
As low as $47.07/mo -
-
-
General Pump TSS1511 Pressure Washer Pump 3500 PSI 4 GPM 1450 RPM 10/16 HP
$1,149.47
As low as $28.74/mo -
-
General Pump T9281 Solid Shaft Pressure Washer Pump
$1,347.97
As low as $33.70/mo -
Comet TW 3570 S Solid Shaft Pressure Washer Pump
$1,099.00
As low as $27.48/mo -
Comet TW 5550 S Solid Shaft Pressure Washer Pump
$2,332.97
As low as $58.32/mo -
Comet TW 8036 S Solid Shaft Pressure Washer Pump
$1,938.47
As low as $48.46/mo -
Comet TW 7036 S Solid Shaft Pressure Washer Pump
$1,314.97
As low as $32.87/mo -
Comet TW 4070 S Solid Shaft Pressure Washer Pump
$1,918.47
As low as $47.96/mo -
Comet TW 5070 S Solid Shaft Pressure Washer Pump
$2,088.47
As low as $52.21/mo -
Comet TWS 7040 S Solid Shaft Pressure Washer Pump
$1,599.97
As low as $40.00/mo -
Comet TWS 10030 S Pressure Washer Pump 1750 RPM 10.7 GPM 3000 PSI
$1,999.97
As low as $50.00/mo -
-
Comet TWS 10025 S Solid Shaft Pressure Washer Pump
$1,357.97
As low as $33.95/mo -
Comet TWS 13020 S Solid Shaft Pressure Washer Pump
$1,894.47
As low as $47.36/mo
Accessories FAQ's
Can I mix brass and stainless fittings?
Yes, both are common. Stainless offers higher wear and corrosion resistance; brass is economical and widely used. In wet or coastal environments, stainless typically holds up longer.
What’s the difference between M22 14 mm and 15 mm?
Both share 22 mm threads, but the stem/seal diameter differs (14 mm vs 15 mm). They can thread together but won’t seal correctly—match the size your machine specifies.
Why won’t my surface cleaner spin?
Common causes are low GPM, clogged or worn nozzles, incorrect tip sizes on the spray bar, or a dry/dirty swivel. Confirm the cleaner’s minimum flow and maintain the swivel per the maker’s guidance.
What does an unloader do?
An unloader valve sets system pressure and diverts flow to bypass when the trigger is released. Avoid extended bypass time because recirculating water heats quickly and can damage seals.
Should I use a 1/4" or 3/8" hose?
Higher‑flow or longer‑run systems typically benefit from 3/8″ I.D. hose to reduce pressure drop. Always verify the hose’s max PSI and temperature ratings against your machine.
How do I choose the correct nozzle size?
Match the orifice to your washer’s GPM and PSI using a sizing chart or calculator. Undersized tips raise pressure and strain the pump; oversized tips reduce pressure and cleaning efficiency.
Which accessories are the essentials to get started?
Most setups start with a high‑pressure hose, a spray gun and wand, a set of color‑coded nozzles, and basic quick‑connect fittings. Add a surface cleaner for faster flatwork and a simple inlet filter to protect the pump.
