PowerWash
Hydro Vaccuum Waste Water & Flood Recovery System 425 CFM 25GPM
SKU: RGV40H12
Specifications
The RGV Gas Vacuum will capture
water 350’ away. Automatic pump out…no need to stop and dump the collection tanks or worry about the tanks
overfilling. It is ideal for facilities maintenance contractors who need to collect wash water or for restoration contractors
who need to pick up water after a fire or flood and need to have their rig parked far away. The vacuum system is gas
powered and completely self-contained – no external power source needed.
Featuring:
Vacuum and pump out simultaneously and automatically, no loss of suction
Use with one operator or two – Recovers up to 25gpm at 350’
Vacuum separation tanks, with sediment dump valves, are non-corrosive poly
and weight less than steel drums
Air throttle valve for precise control of air flow using different pick up devices or
varying hose lengths
Small footprint with fuel tank and battery box
integrated into frame base
| Weight | 535 lbs |
|---|---|
| Dimensions | 44 × 26 × 34 in |
Description
Two new models now available in the Hydro Tek RGV Gas Vac product line.
The RGV Gas Vac is an engine powered, water recovery system with pump out. It can be used with either one or two separate pickup devices and is ideal for facilities maintenance contractors who need to collect wash water or for restoration contractors who need to pick up water after a fire or flood.
The unique polyethylene separation tanks are non-corrosive, weigh significantly less than 50 gallon steel drums, and have access to the inside for periodic cleaning & maintenance with a quick lift-off lid. Open the large 1½” valve to purge sludge/solids that settle at the bottom. Each separation tank has an automatic transfer system which pumps the water out to your bulk tank, landscape, or sanitary sewer where permitted, no heavy tipping to dump your tanks.
Completely self-contained Does not need a generator or 110v plug for the transfer pumps. Transfer pumps connect to an on-board 12v battery
Air throttle valve, on vacuum tanks, for precise control of air flow when using different pickup devices or varying hose lengths
Quick-plug connectors for transfer pumps & high water shutdown
Recovers up to 25gpm, use 350’ total hose length – Use with one or two pickup devices
Small footprint with fuel tank and battery box integrated into frame while keeping a small footprint
Lift-out strainer basket removes large debris before emptying into separation tank to protect transfer pump
Vacuum and pump out simultaneously and automatically, no loss of suction or lost time dumping tanks
Requires 2” diameter vacuum hose and 2” diameter discharge hose
Optional: Solids/Sand separator tank (#ATP36)
Optional: Modular filtration system (#RPF15E1)
Optional: your choice of recovery surface cleaner, vacuum berms and accessories
Specifications
- Positive displacement blower creates vacuum through the included separation tanks
- Inlet/Outlet Size:
- 2″
- Suction Lift:
